L.U.C.A.S PERFORMER Manual 1.0
10 Mains Input
Connections: Use the factory-included mains cable
(power cord) to connect from this socket to a wall
receptacle.
11 Mains Cable Tab
Clamp the power cable into the tab to prevent it
from being pulled out inadvertently.
12 Fans
These fans (on the side and back of the housing)
keep the power amp modules cool. Always keep the
fan and ventilation vents free of dirt and debris, and
ensure they remain unobstructed so air can circulate
freely.
L.U.C.A.S PERFORMER Satellite
Input
Connections: Connect the Speakon
®
inputs to the
left and right L.U.C.A.S PERFORMER satellite out-
puts using speaker cables equipped with Speakon
®
connectors. Note: Be sure to twist the Speakon
®
connectors clockwise until they lock in place! You
must first disengage the safety catch before you can
unplug the connector. To do this, pull the bayonet
catch towards the cord.
4 Tips and Tricks
• Do not expose electronic circuitry to moisture!
When you set the system up outdoors, be sure to
protect it against rain. Keep soft drinks, beer or any
other liquids well away from the cabinets to protect
their electronic components from short circuits.
• To ensure proper ventilation, make sure the sub-
woofer is placed a sufficient distance away from
walls and isn’t covered by curtains and the like.
This is vital to keep the power amps cool.
• Ensure that the vents on the subwoofer’s side
panels are free of dirt and that the fan blades can
rotate freely. Otherwise, electronic components
may overheat and suffer damage.
• L.U.C.A.S PERFORMER takes care of delivering
optimum sound—so provide it with optimum
input signals! Noise such as hum is generally
caused by defective cables, the wrong type of
cables, or unbalanced signals being fed to the
mixing console. Check all audio cables and mains
cables.
• Avoid distortion! Not only is it unpleasant to your
audience’s ears, it also endangers your equipment.
Make sure all components that are connected
directly and indirectly to L.U.C.A.S PERFORMER
have sufficient power ratings, and that they are not
distorting from being driven at their respective
limits. Provide a clean, undistorted signal to the
system that won’t require backing off the Gain
knob to clean it up.
• Avoid ground loops! If, for example, you connect
the mixer to one mains circuit/wall outlet, and
L.U.C.A.S PERFORMER to another, you may
encounter a ground loop. To prevent this problem,
always connect the L.U.C.A.S PERFORMER system
and the mixing console to the same electrical
circuit (same phase!). If your equipment hums
despite this precaution, the Ground Lift switch can
be a great help.
CAUTION: Never tape over the plug’s ground
terminal – this endangers lives!
10
11
12
12
L.U.C.A.S PERFORMER - user panel rear
