HJM_PECS_ENG_Rev.0_02-10-2019
Made in Spain
16
/
24
4. PROGRAMMING
DAY AND TIME PROGRAMMING
1.
Turn the radiator to off/stand-by mode. The
icon will be shown.
2.
Press the
button for more than 3 seconds until the functions can be seen.
Using the
button you can scroll through the following options: “
ted
”(hour and
date), “
prog
”(programming) and “
ofst
”(calibration of the temperature sensor).
3.
Select the “
ted
” option and confirm with the
button.
4.
Enter the current year (15-99) using the
and
buttons. Press the
button
to confirm the selection.
5.
Enter the current month (1-12) using the
and
buttons. Press the
button to confirm the selection.
6.
Enter the current date (1-31) using the
and
buttons. Press the
button
to confirm the selection.
7.
Enter the day of the week (1=Monday, 2=Tuesday, 3=Wednesday, 4=Thursday,
5=Friday, 6=Saturday, 7=Sunday) using the
and
buttons. Press the
button to confirm the selection.
8.
The current hour should then appear on the screen with the digits intermittently
lighting up. The hour can be modified using the
and
buttons. Press the
button to confirm the selection.
9.
The digits indicating the minutes light up intermittently on the screen. The
minutes can be set using the
and
buttons
. Press the
button to
confirm the selection.
CONFIGURATION OF THE P3 PROGRAMME
You can configure your own operating programme (P3) for each day of the week by
following these steps:
1.
Turn the radiator to off/stand-by mode. The
will be shown.
2.
Press the
button for more than 3 seconds. Using the
button you can see
the following options: “
ted
”(hour and date), “
prog
”(programming) and
“
ofst
”(calibration of the temperature sensor).
3.
Select the “
Prog
” option and confirm with the
button.
4.
The programme will start on the first day of the week (1=Monday), and at 0 hours.
The day is divided into intervals of one hour each.
