HJM-NOOR_ENG-Rev.2-25-11-2019
Made in Spain
12
/
19
this operating mode when the room is not occupied for several days. Press the
[Prog]
button until the display shows the "Antifreeze" icon
TIMER-2H MODE
The "Timer 2h" mode can be used to quickly warm up the room or to speed up
towel drying.
-Press the
[Prog]
button until the display shows the "2h" icon.
The device is activated at the maximum power for 2 hours, up to a maximum room
temperature of 32°C. The
“Timer-2h” mode is automatically deactivated after a period of 2 hours and the
device returns to the operative
mode previously set. The user can switch to another operative mode at any time by
simply pressing the
[PROG]
button.
FIL-PILOTE MODE
(Only for product versions equipped with "Fil-Pilote". Only
France)
In "Fil-Pilote" mode the device is managed by a central control system that sets the
operating mode for all the
connected devices. The device operates with the most advanced "Fil-Pilote" system
with six commands, which
allows the following functions:
1.Standby: power off the heating element, the device remains active.
2.Comfort: maintains the "Comfort" temperature set by the user.
3.Eco: maintains the room temperature 3,5°C below the "Comfort" temperature.
4.Anti-freeze: maintains the room temperature at 7°C.
5.Eco-1: maintains the room temperature 1°C below the "Comfort" temperature.
6.Eco-2: maintains the room temperature 2°C below the "Comfort" temperature.
The user can set the desired temperature on the device:
-Press the
[Prog]
button until the "Fil-Pilote" icon is displayed.
Set the desired temperature through the
[+]
and
[-]
buttons.
CHRONO MODE
This operating mode allows the user to configure different temperature values for
each hour of each day of the week. The “Comfort” / “Night” temperatures and the
related time intervals can be thus programmed.
-To activate this function, press the
[PROG]
button until the “Chrono” icon is
displayed.
Programming the “Chrono” mode
a) Setting the current day of the week and time
- Enter into “Stand-by” mode and press the
[-]
button at least 3 seconds.
- On the upper part of the display the message “Set” will be displayed
- To set the day and time press the
[+]
button until the bottom part of the
display the message “TED” is displayed (see picture).
