1
3
1
2
3
2
1
3
3. Clip the cheek pad’s 3 small male snaps to the 3 female snaps fixed on the shell interior.
Shield Cleaning
The helmet shield is made of polycarbonate materials with a polyurethane abrasion resistance coating.
It should be cleaned using mild soap and warm water. Never use hot water, salt water, benzene, thinner,
gasoline or any other harsh agents. Additionally the use of commercial shield cleaners is not recommended
because they may affect the quality of the shield material. Treat carefully when cleaning the shield to
preserve the abrasion resistant coating. When deep scratches are visible, it is highly recommended that
the helmet shield be replaced. Tinted shield are for “Day time use only” and are not suitable for use at night
or in conditions of poor visibility.
Vent Cleaning
Dirt and debris can find its way into venting of your HJC helmet. Compressed air cans used for cleaning
computer keyboards may be used to blow the debris from the ventilation system. It is recommended that
you remove any removable pads before doing this process.
