Hiwin LMSSA, Руководство по сборке

Страница: 21 / 44

Contents
Linear motor axis LMSSA LMSSA-01-1-EN-2201-MA Seite 21 von 44
5.1 Assembling the linear motor system
Note:
Secure the screws with retaining rings to prevent them from accidentally coming loose!
Steps to assemble the linear motor system:

Remove the shipping devices.

Remove the transportation safety device from the forcer housing.

Remove the cover or bellows if the mounting holes are inaccessible.

Drill mounting holes in the mounting surface in accordance with scale drawing (see Technical Information
and Approval Drawing).

Clean mounting surface.

Place the mounting bolts in the mounting holes and tighten them in a spiral motion from inside to outside
with applied torque (See Table 5.1).

If the cover or bellows were removed, install them back.
Fig. 5.1: Assembling the linear motor system – here for an LMSSA-18/20 linear motor system
Table 5.1: Mounting torque
Suitable for linear axis Mounting Screw Size Torque (Nm)
SSA-08, SSA-10 top M4 3,9
bottom M5 8,8
SSA-13 top M5 8,8
bottom M6 11,7
SSA-18 top M5 8,8
SSA-20 top M5 8,8