Hiwin HM-S, Руководство по сборке

Страница: 89 / 100

Appendix 2: Accessories
89
Assembly Instructions
Linear Axes HM-S and HT-S
HMS_HTS-01-0-EN-1905-MA
Appendix 1: Accessories and spare parts
12.5 Limit switch
Inductive limit switch as NC or NO contact. A screw (M3 × 12) and nut (DIN EN ISO 4035) is necessary to fix the sensor to the
axis profile. The limit switch is supplied as standard with plug or open cable end. Set including mounting material.
Table 12.6 Limit switch options
Option Article number
Limit switch with 100 mm cable, plug (NC) 25-000786
Limit switch with 4 m cable (NC) 25-000787
Limit switch with 5 m cable (NO) 25-000788
Fig. 12.7 Limit switch for linear modules HM-S and linear tables HT-S
For more information see Section 4.4 on Page 17.
NOTE
12.6 Extension cable for limit switch
Cable with 3-pin M8 round connector on the limit switch side and exposed wires on the other cable end.
4
3 1
Fig. 12.8 Extension cable for limit switch
Table 12.7 Extension cable for limit switch
Length [m] Article number
3 8-10-0275
5 8-10-0276
7 8-10-0277
10 8-10-0278
15 8-10-0279