HiWeigh X2-BMI, Руководство пользователя

Страница: 6 / 12

6
5. FURTHER OPERATIONS
4.5 Manual Hold
When the weight is stable, press HOLD
key to lock the weight and press it again to unlock.
4.6 Print
If the printer connected or PC connected, press PRINT
to print the receipt or send data to computer,
and the format as below:
TICKET NO.:
00005
G.W: 78.5kg
T.W: 2.0kg
N.W: 76.5kg
H: 180cm
BMI: 23.6
4.7
Units Exchange
Press UNIT
to exchange the weight units
Units set (kg/lb as default) - Refer to TECHNICAL MANUAL
Press BMI key and ON/T at the same time, it will display UF - 1 , press ON/T or PRINT to
shift it from UF - 1 to UF - 9 , press BMI to enter and configure it.
5.1
Internal A/D Value and Battery Volume
UF - 1
Press BMI
to view the internal A/D value of the scale
Press BMI again to display the voltage of the battery.
Press BMI again to change for next set or press UNIT to quit and back to normal weighing mode
5.2
Hi/Lo/Ok Checkweigh Function
* You can set a ideal weight as you want to achieve and the indicator will beeps if the weight above or low
than the weight you want.
UF – 2 Press ON/T PRINT HOLD to move and change the digits.
Press BMI
to set the Lo value (the lower limitation) – 000.00L
Press BMI to set the Hi value (the top limitation) – 000.00h
Press BMI to change the working mode of buzzer of Hi/Lo/Ok – o 000
Remark
o 0 0 0
o A B C
A=0
Stable but no need to buzz
A=1
Stable to buzz
B
no function, keep it as default and no change
C=0
Buzzer off
C=1
It beeps when the weight is ok (Lo<weight<Hi)
C=1
It beeps when the weight is out of limitation (Lo>weight or weight>Hi)