HiWeigh RDS, Руководство пользователя

Страница: 6 / 12

4
4. Connecting
For 2-pins connector
For 9-pins DB9 connector
5. Operation
Connect the RS232 cable firstly between the indicator and the RDS display, as above figures, and then
plug the power cable, it will detect the baud rate and protocols automatically, if it detects the correct
baud rate and protocol, it will display the same weight as the indicator simultaneously; if the data is
incompatible with the protocols of RDS, it will display No Signal or Error
6. Protocols List
It can work with the below protocols, if your protocol is not in the list, you can send us your data
format (in hex) of below weight:
Positive with decimal point, eg.: 20.00kg (in hex)
Positive without decimal point, eg.: 20kg (in hex)
Negative with decimal point, eg.: -20.00kg (in hex)
Negative without decimal point, eg.: -20kg (in hex)
A. End with cr If (Hex = 0D 0A)
Moorange K3 K5
Protocol 1
ST,GS 87,g (hex format 53 54 2C 47 53 20 20 20 20 20 20 38 37 2C 67 20 0D 0A)
Protocol 2
ST,GS, 87g (hex format 53 54 2C 47 53 2C 20 20 20 20 20 20 38 37 67 20 0D 0A)
Pin1 ……………… GND (black)
Pin2 ……………… RX (red)
Pin2 ……………… RX (red)
Pin5 ……………… GND (black)