Front Panel Controls
INPUT –
Jack Input for guitar.
PULL BRIGHT* –
When pulled boosts the
signal on clean channel. It can be toggled from the
“High Gain” switch on the footswitch.
CH1 VOLUME –
Controls the gain level for
Channel 1.
CH1/CH2 SWITCH* –
Selects Channel 1 or
Channel 2. It can be toggled from the “CH1/CH2”
switch on the footswitch
CH2 GAIN –
Controls the gain level for Channel
2. As the amount of gain increases so will the
distortion level in the sound.
PULL HI GAIN* –
When pulled drives more the
signal on dirty channel. It can be toggled from the
“High Gain” switch on the footswitch.
BASS –
Adjusts the low-frequency tone.
MIDDLE –
Adjusts the mid-frequency tone
TREBLE –
Adjusts the high-frequency tone.
* Controls inactive when footswitch is plugged in.
PRESENCE –
Adds higher frequencies to the
guitar tone after the power stages.
CH2 LED –
Indicates when CH2 Level control is
active.
CH2 LEVEL –
Controls the volume level of
Channel 2.
REVERB –
Controls the reverb level on both
Channels. It can be toggled from the “Reverb” switch on
the footswitch
MASTER –
Adjusts the overall volume of the
amplifier.
POWER LIGHT –
Indicates when the Mains
Switch is ON.
STANDBY SWITCH –
Disconnects H.T. or high
voltage from the valves to allow them to attain correct
working temperature before playing. Always switch on
the Mains Switch about 2 minutes before switching on
the Standby.
MAINS SWITCH –
On / Off Switch for mains
power to the amplifier.
HI
-G
AI
N
SERI
ES
HI
-G
A
IN
50 &
100
Pg 4
