English
/ German / French / Spanish / Italian / Dutch / Japan
Batteries and power equipment should not be regarded as general household waste disposal. You have
made significant contributions to environmental protection by riding electric bicycles. In order to further
avoid unnecessary pollution:
1. Please handle your electric bicycle and all related accessories (batteries) through authorized processing
facilities.
2. Please follow the latest applicable guidelines. If you have any questions, please contact our after-sales
department.
6.3.Processing
In case of insufficient air pressure or different air pressure of two tires, please inflate in time to ensure that
the air pressure of the two tires is the same. The default factory tire is 2.8Bar, and the rear wheel is 2.5Bar.
If the tire needs to be replaced due to a flat tire or other reasons, please contact our after-sales
department for repair. (You can also go to a bicycle repair shop to repair).
6.4.Inflation and replacement of inner and outer tires
1. Insert the elbow into the screw of the brake and fix it to the frame. According to the direction of the
screw "left and right tighten", first turn it gently to the left to loosen the brake slightly.
2. Then, the left (right) hand squeezes the brake, the purpose is to hold the rear brake close to the brake
pads and keep it squeezed.
3. Then use the elbow to tighten the brake backwards until the brake is fixed tightly, and then release the
brake, the brake automatically responds, the brake pads are in the right direction, and they will not be
worn.
6.5.Disc brake maintenance
-8-
