Hitron HTM190C, Инструкция по эксплуатации

Страница: 8 / 32

- 7 -
INSTALLATION
LCD monitors may be mounted in any position or orientation. Considerations for
mounting include regard for how the monitor is going to be used, routing of
connecting cords, and locations away from heat sources (including direct sunshine
on the black case).
Mounting hard points include 10-32 inserts.
Cooling is not required, but some airflow around the case will allow the small
amount of heat to be dissipated.
Power is required from a regulated supply (provided) or other 12 volts DC, 10%
DC source. The noise on the supply needs to be below 100 mVpp.
Note that many portable battery systems and all automobiles that have
a 12 volt nominal supply will often be found to have high voltage spikes and be as
high as 18 volts when charging or fully charged.
CAUTION:
Plug and Play
The adoption of the VESA Plug and Play solution eliminates complicated and time
consuming setup.
It allows you to install your monitor in a Plug and Play compatible system without
the usual hassles and confusion. Your PC system can easily identify and configure
itself for use with your display.
Select Start/Setting/Control Panel.
Installing the Video Driver (Windows 95/98)
To install the Video driver, refer to the following sequence.
If operating system is not Window 95/98, refer to the installation Guide on page 12.