Version 2.0, February 2012. Copyright
2012 Hitron Technologies
22
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
22
HITRON CGN2 USER’S GUIDE
1.4.1
MANUAL IP ADDRESS SETUP
By default, your CGN2’s local IP address is
192.168.0.1
. If your CGN2 is using the
default IP address, you should set your computer’s IP address to be between
192.168.0.2
and
192.168.0.254
.
NOTE:
If your CGN2 DHCP server is active, set your computer to get an IP address
automatically in step 5. The CGN2 assigns an IP address to your computer.
The DHCP server is active by default.
Take the following steps to manually set up your computer’s IP address to connect to
the CGN2:
NOTE:
This example uses Windows XP; the procedure for your operating system
may be different.
1
Click
Start
, then click
Control Panel
.
2
In the window that displays, double-click
Network Connections
.
3
Right-click your network connection (usually
Local Area Connection
) and click
Properties
.
4
In the
General
tab’s
This connection uses the following items
list, scroll
down and select
Internet Protocol (TCP/IP)
. Click
Properties
.
5
You can get an IP address automatically, or specify one manually:
If your CGN2’s DHCP server is active, select
Get an IP address
automatically
.
If your CGN2’s DHCP server is active, select
Use the following IP address
.
In the
IP address
field, enter a value between
192.168.0.2
and
192.168.0.254
(default). In the
Subnet mask
field, enter
255.255.255.0
(default).
NOTE:
If your CGN2 is not using the default IP address, enter an IP address and
subnet mask that places your computer in the same subnet as the CGN2.
6
Click
OK
. The
Internet Protocol (TCP/IP)
window closes. In the
Local Area
Connection Properties
window, click
OK
.