HiTRAx 42.7005, Руководство по эксплуатации

Страница: 2 / 8

2
- START/SPLIT TIME (STOP WATCH MODE)
- ALARM ON/OFF
-
FORWARD SETTING (SETTING MODE)
S2: STOP
- DISPLAY MONTH-DAY/SECONDS
- STOP (STOP WATCH MODE)
-
SELECT DATA DISPLAY (STOP WATCH STOPPED)
- ALARM ON/OFF
- REVERSE SETTING (SETTING MODE)
S3: MODE
-
MODE CHANGE
- SELECT SETTING (SETTING MODE)
S4: SET/RESET
-
SET (PRESS AND HOLD)
-
RE-LINK WATCH AND TRANSMITTER
- RESET STOP WATCH AND DATA (PRESS AND HOLD WHEN STOP WATCH STOPPED)
- EXIT (SETTING MODE)
S5: EL BACK LIGHT
4. Mode change
Press S3 for mode change operation. The sequence is as following:
Remark:
At any mode, press and hold S3 for 3 seconds to change directly to Time mode.
5. Heart rate measurement
To use the heart rate measuring function, follow these steps:
a) Enter data for heart rate monitor:
- Press S3 to enter Pulse mode. “PULS” will be displayed briefly.
- Press and hold S4 for 2 seconds to enter Setting mode. “ZONE HR” with flashing “on” will be displayed.
- Press S1 (forward) or S2 (reverse) to set the data (flashing). Press and hold S1 or S2 for fast setting.
- Press S3 to select the next data for setting. The sequence is shown as follows:
TIME
PULSE
STOP WATCH
ALARM
S3
S3
S3
S3
S1 S4
S2 S3
1 SECOND
AUTO
S5