4
AIR-TO-AIR UNITS – COMPACT HORITZONTAL INVERTER
ACHIA / ACHIBA
11.14 207434 Rev.103
The contents of this manual are designed to assure the correct installation, adjustment and
maintenance of the unit, therefore:
• Read the instructions with due care and attention.
• The appliance must be installed, tested and serviced by properly qualified staff licensed in accordance with the
established legislation.
• The manufacturer declines all liability and warranty coverage is automatically waived, if electrical and/or mechanical
modifications to the unit. Tampering and unauthorized repairs or modifications to the unit will automatically void the
warranty.
• Observe the safety regulations in force at the time of installation.
• Make sure that the characteristics of the mains network conform to the data on the serial number plate placed on the
unit.
• Keep this manual and the wiring diagram with care and make sure that they are available for consultation by the
operator whenever necessary.
• Packing materials (plastic wrappings, expanded polystyrene, etc) are potentially hazardous and must be kept out of
reach of children. Recycle packing materials in accordance with local legislation.
• The units must be used only for the purpose for which they are designed .The manufacturer bears no responsibility in
the case of applications other than the specified use.
• Disconnect the unit in the event of breakdowns or malfunctions.
• If repairs are necessary, use only HITECSA approved service centres and always insist on original spare parts. The
use of non-original parts and/or unauthorized service centres may result in unsafe operation of the unit.
Regulations and certifications
ISO 9001:2008 CERTIFICATION:
HILPUS AIRE ACONDICIONADO S.L., trying always to find the customer satisfaction,
has obtained the ISO 9001:2008 Quality System referred to its production activity. This will results in a continuous
determination to improve quality and reliability of all our products; commercial activities, design, raw materials, production
and after-sales service, are the means to reach our goal.
CE MARKING
: Our machines have got the CE mark, in conformity with the essential requirements of the applicable EC
directives and their last modifications as well as with the national legislation of each country.
INTRODUCTION
