background image

28

29

Disposal and Prop 65 Warning

This symbol indicates that when this type of electronic device reaches 

the end of its service life, it cannot be disposed of with normal household 

waste and must be recycled. To fi nd a recycling center near you, refer to 

the internet or your local phone directory for electronic waste recycling centers.

STATE OF CALIFORNIA PROPOSITION 65 WARNING:

This product contains chemicals known to the State of California to cause cancer. 

Use caution when handling this product and avoid exposure to any electronic 

components or internal assemblies.

Warranty and Service

LIABILITY EXCLUSION:

 

This charger is designed and approved exclusively for use with the types of 

batteries stated in this Instruction Manual. Hitec RCD, USA accepts no liability 

of any kind if the charger is used for any purpose other than that stated. We are 

unable to ensure that you follow the instructions supplied with the charger, 

and we have no control over the methods you employ for using, operating 

and maintaining the device. For this reason we are obliged to deny all liability 

for loss, damage or costs which are incurred due to any misuse or operation 

of our products. Unless otherwise prescribed by law, our obligation to pay 

compensation, regardless of the legal argument employed, is limited to the 

invoice value of Hitec RCD, USA products which were immediately and directly 

involved in the event in which the damage occurred. 

ONE YEAR LIMITED WARRANTY:

For a period of one year from the date of purchase HITEC RCD USA, INC. shall 

REPAIR OR REPLACE, at our option, defective equipment covered by this 

warranty, otherwise the purchaser and/or consumer is responsible for any 

charges for the repair or replacement of the charger. This warranty does not 

cover cosmetic damages and damages due to acts of God, accident, misuse, 

abuse, negligence, improper installation, or damages caused by alterations 

by unauthorized persons or entities. This warranty only applies to the original 

purchaser of this product and for products purchased and used in the United 

States of America, Canada and Mexico. Plastic cases are not covered by this 

warranty.

Warranty and Service 

[

cont.]

THIS WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER 

FOR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND 

WHETHER EXPRESS OR IMPLIED. REPAIR OR REPLACEMENT AS PROVIDED UNDER 

THIS WARRANTY IS THE EXCLUSIVE REMEDY. HITEC RCD, INC. SHALL NOT BE 

LIABLE FORANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF 

ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THIS PRODUCT. EXCEPT 

TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT 

IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. REPAIR AND 

SERVICE.

To have your Hitec charger serviced:

1. Visit the Hitec website at www.hitecrcd.com and download the service request 

form (under Support section). 
2. Fill out the service request form completely and include a copy of your original 

receipt showing the purchase date. 
3. Package your product in its original packaging or use a suspension-type 

packaging (foam peanuts or crumpled newspaper). Hitec RCD shall not be 

responsible for goods damaged in transit.
4. Ship prepaid (COD or postage-due returns will not be accepted) via a 

traceable common courier (UPS, insured parcel post, FedEx, etc.) to:
Hitec RCD USA, Inc., Customer Service Center, 12115 Paine St., Poway CA 92064

Содержание X1 mini

















Отзывы: