Transmitter Antenna Installation
The conventional steel antenna (included with the module) required to install
prior to use. You are required to remove 2.4GHz antenna and the antenna
holder before the installation.
1. Disassembling the Antenna Mount and Folding Antenna
a.
Snap the antenna apart as shown in picture #1. Carefully remove the mod
ule from the back of the Aurora 9 transmitter.
b.
Remove the antenna mount from the transmitter by turning it to the counter
clock wise direction.
Introduction
Thank you for your purchase of the Hitec Synthesized 72MHz PCM/PPM
Spectra Pro Module for Aurora 9. This manual contains the complete
directions on how to install and use the module and the receiver with
Aurora 9 transmitter. We encourage you to review the entire manual
before using these products.
Service & Support
Hitec Customer Service
Help is available from Hitec customer service through phone support and
e-mail inquiries. Our US office is open Monday thru Friday, 8:00AM to
4:30PM PST. These hours and days may vary by season. We make every
attempt to answer all incoming service calls; should you reach our voicemail,
please leave your name and number and a staff member will promptly
return your call.
Hitec Website
We invite you to regularly visit our website at www.hitecrcd.com for
specification information and descriptions of our entire product line.
Our FAQ pages provide valuable information as well as program updates
on the radio, module, receiver, and other update available products.
The On-Line Community
One of the benefits of the extensive RC on-line community is the vast
wealth of archived information available.
Hitec sponsors forums on most of the popular RC websites where a Hitec
staff member or representative answers product-related questions.
Bringing together strangers with common interests is proving to be one of
the greatest gifts of the internet. If past history is any guide to the future,
we are certain forums will be started about the Hitec system creating
valuable archived
information for future access.
Warranty and Non-Warranty Service
All Hitec products carry a two-year warranty against manufacturing defects
from date-of- purchase. Our trained, professional service representative
will determine if the item will be repaired or replaced. Please complete and
include the repair form at www.hitecrcd.com when you return your item so
that we may administer your repair promptly.
Hitec Service
12115 Paine St. Poway CA
920641-858-748-6948
E-mail: [email protected]
Warning!
1. For maximum performance,
we recommend the antenna to be
extended to its maximum length.
2. The receiver antenna should not be
placed near the engine, metal parts or
high current batteries.
3. Depending on flying conditions,
you may possibly experience shorten
in flight range and unstable flying
condition. Please make sure to check
and eliminate all the possible problem
causes before each flight.
SPECTRA PRO Module Features Synthesized
72MHz PCM/PPM ModuleStock # 23772
1. Spectra Pro Module
- A synthesized RF module, Spectra Pro supports 72MHz PCM/PPM band
width. Simply plug in the module to Aurora 9 transmitter and link with the
Hitec receivers.
2. Transmitter Antenna
- To use Spectra Pro with Aurora 9, conventional steel transmitter antenna is
required. * Stock # 58005. For the best reception, extend the antenna in
full length all the time before flight.
3. Compatible Transmitters
- The Spectra Pro can only be used with Aurora 9 at this moment.
Instruction
Manual
Version 1.0
