2
3
1
Introduction
Congratulations, you now own one of the most unique and revolutionary radio control systems in the world.
The Neon 3 was created for the beginner and seasoned R/C enthusiast to grow with your needs and skill level.
The basic Neon can be upgraded with a variety of features like;
- A 4th channel two position switch
- Dual Rates
- ATV's on ch. 1 and 2
- A trainer port and switch package
Any way you customize the Neon, we are sure you will be satisfied with the performance of the radio system.
Good luck and good flying!
2
Features and Specifications:
Transmitter
Single Stick 3 channel, (upgradeable to 4 channel) FM proportional system
Dual axis precision gimbal
Adjustable gimbal stick length
Adjustable gimbal stick tension
3 LED battery status indicators
Charging jack for internal Nicad battery
Servo reversing function for channels 1, 2, 3 and 4
Elevon or V-tail mixing function
Proportional 3rd. channel slide switch
Channel 1 and 2 trim levers
Options
- Channel 4 three position switch, part # 54301
- Channel 1,2 and 3 ATV function. part # 54302
- Trainer plug and switch, part # 54303
- Channel 1 and 2 Dual Rate function # 54304
(must use optional part 54304, ATV function, in addition to this option)
System Components
Receiver
Standard version includes Electron 6 channel Dual Conversion 6 channel FM receiver
Micro version includes HFS-04MG 4 channel Single Conversion 4 channel FM receiver
Servo
Standard version includes two HS-81 micro servos
Micro version includes two HS-55 sub-micro servos
Accessories, all systems
One CG-25 or CG-22A overnight wall charger, part # 43025 or # 43022
One Switch harness, part # 54403
One AAA receiver battery box, part # 54402
3
Set-up and Operation
Transmitter
Opening the case
The case of your Neon is unique because it does not have
the traditional screws holding it together.
Instead we have created a "pull apart" case to facilitate
access to the inside components.
To open your case, slide the tabs located at the bottom
corners off and gently pull the bezel at the base of the
antenna up.
Now separate the two case half's while being careful of the
internal wiring harness to the throttle switch, unplug the wires
leading to the throttle switch, and you can now access the
internal components to add optional feature packages,
reverse your servos, or change the battery out.
- Size: 45.5 x 22.5 x 15.0 (mm) / 1.79 x 0.88 x 0.59 (inch)
- Weight :17g(0.6oz) without X-tal / 13g(0.4oz) without case
- Size: 25 x 37.5 x 16 (mm) / 0.98 x 1.47 x 0.62 (inch)
- Weight : 15.9
- Speed : .17(4.8V) /.14sec(6.0V)
- Torque : 1.1(kg/cm) / 15oz at 4.8V
1.3(kg/cm) /18oz at 4.8V
- Size : 23 x 12 x 24(mm) / 0.90 x 0.45 x 0.94(inch)
- Weight : .28oz/8.0g
- Speed : .11(4.8V) /.10sec(6.0V)
- Torque : 2.6(kg/cm) / 36oz at 4.8V
3.0(kg/cm) / 42oz at 6.0V
- Size : 30 x 12 x 30(mm) / 1.2 x 0.47 x 1.2(inch)
- Weight : .58oz/16.6g
OPEN
OPEN
