HITEC multi cahrger X4 AC Plus, Инструкция по эксплуатации

Страница: 2 / 28

TABLE OF CONTENTS INTRODUCTION
01
Introduction.…..…..…..…..…..…..…..…..…..…..…..…..…..…..…..….01
Charger Layout…..…..…..…..…..…..…..…..…..….…..…..…..…........03
Special Features…..…..…..…..…..…..…..…..…..….........................04
Warnings and Safety Information…..…..…..…..…..…..…..…..…..…..06
Default User Preferences Setup…..…..…..…..…..…..…..…..…..…...09
Connecting the Battery…..…..…..…..…..…..…..…..…..….................11
Program Flow Chart…..…..…..…..…..…..…..…..…..….....................12
Program Display Information…..…..…..…..…..…..…..…..…..…........13
Charging Lithium Chemistry (LiPo/LiIo/LiFe) Type Batteries............13
Discharging Lithium Chemistry (LiPo/LiIo/LiFe) Type Batteries........16
Charging/Discharging and Cycling NiCd or NiMH Batteries..............17
Charging/Discharging Lead-Acid (Pb) Batteries...............................18
Battery Data Preset Storage and Load Feature…..…..…..…..…..…..20
Warning and Error Messages…..…..…..…..…..…..…..…..…..…........21
Recommended Accessories…..…..…..…..…..…..…..…..…..…..........22
Conformity and Regulatory Information…..…..…..…..…..…..…..…...22
Warranty and Servicing…..…..…..…..…..…..…..…..…..…................23
Congratulations on your purchase of the Hitec X4 AC Plus Multi-Charger. You are now the
owner of a compact multi chemistry battery charger with battery management and integral
Lithium battery balancing features. The X4 AC Plus features four totally independent and
identical 50 watt charging circuits for a total power of 200 watts. As a result, it can simulta-
neously charge or discharge up to 4 separate battery packs.
The X4 A C Plus can accept a variety of power inputs. The charger features a built in 22
Amp power supply powered by your standard 100-120 V AC household current or you can
attach it to a 12 Volt car battery or a 11 – 15 V (20 amp minimum) DC power supply.
The Hitec X4 AC Plus is simple to use, but the operation of a sophisticated automatic
charger such as the X4 AC Plus does require some knowledge and education by the user.
This instruction manual is designed to ensure that you can quickly become familiar with
the charger’s functions and capabilities. It is important that you read this instruction
manual in its entirety before attempting to use your new X4 AC Plus chargers.
1. Hitec X4 Plus
2. AC Input Cable
3. DC Input Cable
4. Battery Clamps
5. Alligator Clip Charging Connector
6. Tamiya Charging Connector
7. Receiver Battery Charging Connector
8. 2 x Bare Wire Connectors
9. 1 x TP/FP Type LiPo Balancer Board
10. 1 x HP/PQ Type LiPo Balancer Board
11. 1 x XH Type LiPo Balancer Board
1
2
3
4
5
6
7
8
9
10
11
Package Contents