3.Transmitter Receiver and Servo Settings
Now we come to the critical part as proper installation of these components
are
essential.
a. Checking Operation of the Servo
After installation of the servo and receiver into your model is complete, turn
the power "ON" the transmitter (fully extend the antenna) now turn on the
receiver.
(Note: Do not connect the linkage to the servos until the servo test procedure
is completed as unexpected movement may damage the servos or the model)
- Check to see if all servos are working properly. If not, check the
connections and/or make sure the main battery pack is charged.
- If the servos check out fine, connect the linkage to the servo horns now.
Check to see that the servos are moving in the correct direction. If not, change
the servo direction, with the reversing switches located on the back of the radio.
The 3
rd
channel of the Focus 3 SS FM is not reversible.
- If everything checks out then turn the receiver "OFF" first, then the
transmitter.
The Focus 3 SS FM offers an internal electronic mix for channels I and 2 to
deliver an Elevon or V-tail mix for those aircraft requiring those specific
functions.
(Always remembers to never have the receiver "ON" without the transmitter being
"ON". This means when turning your model "ON" always turn the transmitter "ON"
first and "OFF" last)
(Note: Please make sure to fold the transmitter antenna after use so as not to
get damaged or poke someone in the eyes)
