10
This manual contains important safety and operating
instructions. Before you use the power supply, thoroughly
read all the instructions and cautionary notes on the power
supply and the products you will be connecting to the
power supply.
1. Never leave your ePowerBox 17A unattended when in
operation.
2. Not intended for use by children under 14 years of age.
3. Do not use the power supply near water, for example:
a bathtub, sink, wet basement, swimming pool or in
the rain.
4. Do not place the power supply on an unstable cart,
stand or table. If the power supply falls, it could injure
a person or cause serious damage to the power supply.
5. Do not overload power outlets or extension cords.
An overload can result in fi re or electric shock.
6. Do not disassemble this unit; take it to a qualifi ed
service technician or contact MULTIPLEX Modellsport
GmbH & Co.KG support when service or repair is
required. Improper reassembly may result in a risk of
electric shock or fi re.
7. Do not use an attachment not recommended for this
power supply as risk of fi re, electrical shock or injury
could occur.
8. Never force an object into the slot in the power supply.
It could touch dangerous voltage points or short out
parts, resulting in a fi re or electrical shock.
9. Make all other connections before you connect the
power supply to standard AC power.
10. Follow the correct polarity when connecting the power
supply and the device to avoid damage to both the
power supply and the device. Always connect the red
(+) positive lead from your charger or other DC device
to the red (+) positive terminal on the power supply,
and the black (–) negative lead from your charger
or other DC device to the black (–) negative terminal
on the power supply. Never let the ends of the positive
and negative wires touch each other while powered on.
Caution – To reduce the risk of property damage or
injury:
1. Do not operate the power supply if it has been dropped
or damaged in any way. Contact Multiplex Modellsport
GmbH & Co.KG support for repair.
2. The power supply should be operated only from a
standard AC outlet that provides 100-240 VAC with a
frequency range of 50/60 Hz.
3. To protect the power supply during a lightning storm
or when it has been unused for a long period of time,
unplug it from the AC outlet. This will prevent damage
to the power supply from lightning and power surges.
4. Unplug the power supply from the outlet before
attempting any maintenance or cleaning.
5. Do not use liquid or aerosol cleaners. Use a damp cloth
for cleaning and then wipe it dry immediately.
6. If your power supply does not operate normally,
particularly if any unusual sounds or smells are being
emitted, unplug it immediately and contact Multiplex
Modellsport GmbH & Co.KG support for repair.
1.5. Important Safety Information
