HITCHFIRE LEDGE, Руководство пользователя, Страница: 4 / 10

4
1. Slide the swing away arm assembly into your hitch and secure it with the
hitch stabilizer bolt
A. Tighten the bolt using a wrench, make sure to tighten the bolt all the
way through to the other side of the hitch, slide the cotter pin into the bolt.
2. Pull out and twist the hinge spring lock. ‘
A. Release the slam-latch by pressing down on the lever.
3. Swing the arm away from the vehicle and lock at 90 degree position for
stability. Place the Ledge platform onto the arm.
4. Clamp the quick release lever to secure the Ledge platform.
5. Lock the ledge platform head onto the arm with a padlock. (Not
included)
6. Swing the arm closed, pushing towards the vehicle until the slam-latch
is fully engaged.
7. Rotate the hinge spring lock to engage the plunger.
Use of phillips or flat head screw driver can be utilized to remove side rails
to allow for larger
***The maximum allowable weight on the Ledge is 100 lbs when used with
an adequate hitch receiver. Please consult your vehicle user manual to
confirm Class III hitch classification.
OPERATING INSTRUCTIONS