Hitachi WR 12DAF, Инструкция по эксплуатации

Страница: 7 / 90

English
6
10. Always charge the battery at a temperature of 0 –
40°C.
A temperature of less than 0°C will result in over
charging which is dangerous. The battery cannot
be charged at a temperature greater than 40°C.
The most suitable temperature for charging is that
of 20 – 25°C.
11. When one charging is completed, leave the charger
at least 15 minutes before the next charging of
battery.
Do not charge more than two batteries
consecutively.
12. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
13. Never disassemble the rechargeable battery and
charger.
14. Never short-circuit the rechargeable battery.
Short-circuiting the battery will cause a great electric
current and overheat. It results in burn or damage
to the battery.
Model WR12DAF
No-load speed 0 – 2200 min
–1
Capacity
M6 – M14 (Ordinary bolt)
M6 – M10 (High tension bolt)
Tightening torque
Maximum 110 N·m {1120 kgf·cm}
Tightening is M12 high tension bolt (strength grade 12.9), when fully
charged at 20
°
C temp.
Tightening time: 3 sec.
Rechargeable battery
EB1214L: Ni-Cd battery, 12 V (1.4 Ah, 10 cells)
EB1220BL: Ni-Cd battery, 12 V (2.0 Ah, 10 cells)
EB1226HL: Ni-MH battery, 12 V (2.6 Ah, 10 cells)
Weight 1.6 kg
CHARGER
Model UC12SD UC14YFA
Charging time EB1214L: Approx. 60 min. (at 20°C)
EB1220BL: Approx. 50 min. (at 20°C)
EB1226HL: Approx. 60 min. (at 20°C)
Charging voltage 12 V 7.2 – 14.4 V
Weight 1.4 kg 0.6 kg
15. Do not dispose of the battery in fire.
If the battery burnt, it may explode.
16. Do not insert object into the air ventilation slots of
the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
17. Bring the battery to the shop from which it was
purchased as soon as the post-charging battery life
becomes too short for practical use. Do not dispose
of the exhausted battery.
18. Using an exhausted battery wil damage the charger.
MODEL
WR12DAF: with charger and case
SPECIFICATIONS
POWER TOOL
STANDARD ACCESSORIES
1. Charger (UC12SD or UC14YFA) ............................... 1
2. Plastic case ................................................................ 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES
(Sold separately)
1. Battery (EB1214L, EB1220BL, EB1226HL)