--- 26 ---
(c) Mount a unit of the Inner Cover [24] <19>, Magnet [26] <21> (including the Dust Guard Fin [27] <22>) and
the Brush Block [28] <23> to housing (A) (see Fig. 12). Pay attention to the following items.
Adjust the protrusion of the Dust Guard Fin [27] <22> to the notch of the Magnet [26] <21> when
mounting the Dust Guard Fin [27] <22> to the Magnet [26] <21> (see Fig. 11).
Insert the two Dampers [23] <18> so that they fit into the Inner Cover [24] <19>. Fit the locking rib of the
Ring Gear [20] <15> to the concave portion of the Damper [23] <18>. Press-fit the Armature Ass'y [25]
<20> into the Inner Cover [24] <19>.
Adjust the convex portion of the Dust Guard Fin [27] <22> to the concave portion of the Brush Block [28]
<23> (see Fig. 11).
Adjust the notch (for locking) of the Magnet [26] <21> to the protrusion of housing (A) (see Figs. 11 and 12).
Position the plate of the Dust Guard Fin [27] <22> under the rib of housing (A) (see Fig. 13).
Fig. 11
Fig. 12
Dust Guard Fin
[27] <22>
Brush Block [28] <23>
Magnet [26] <21>
Concave
portoin
Convex
portion
Protrusion
Notch
Adjust the protrusion of housing (A) to
the notch of the Magnet [26] <21>.
Housing (A)
