Hitachi W 4YD, Технические данные и руководство по обслуживанию

Страница: 9 / 23

--- 6 ---
+ driver bit No. 2
Hook ass'y
Sheet
Rubber cover set
Case
Item
Screw size
Screw length
Power input
No-load speed
Power input
No-load noise level
Moment of center of gravity
Load of feeder
Weight (without cord)
Overall length (listed on the catalog)
Bit shaft length (28L/41L)
Cord length
Hitachi
W 4YD
6. COMPARISONS WITH SIMILAR PRODUCTS
6-1. Specification Comparisons
Maker/Model
Unit
mm
mm
W
min -1
W
dB
N
•
m
N
kg
kg
mm
m
Capacity
4 (5/32")
25 --- 40 (1" --- 1-9/16")
470
4,700
455
79
1.9
47
1.9 (4.2 lbs.)
364 (14-11/32")
336 (13-3/16")/348 (13-11/16")
2.5 (98-7/16")
Standard accessories
4 (5/32")
25 --- 41 (1" --- 1-5/8")
470
4,700
450
81
1.7
34
1.7 (3.7 lbs.)
335 (13-3/16")
335 (13-3/16")/335 (13-3/16")
5 (196-7/8")
C
+ driver bit No. 2
Hook ass'y
Case
7. PRECAUTIONS IN SALES PROMOTION
In the interest of promoting the safest and most efficient use of the Model W 4YD Automatic Screw Driver by all of
our customers, it is very important that at the time of sales the salesperson carefully ensures that the buyer
seriously recognizes the importance of the contents of the Handling Instructions, and fully understands the
meaning of the precautions listed on the Caution Plate attached to each tool.
7-1. Handling Instructions
Although every effort is made in each step of design, manufacture and inspection to provide protection against
safety hazards, the dangers inherent in the use of any electric power tool cannot be completely eliminated.
Accordingly, general precautions and suggestions for the use of electric power tools, and specific precautions and
suggestions for the use of the electric screwdriver are listed in the Handling Instructions to enhance the safe and
efficient use of the tool by the customer. Salespersons must be thoroughly familiar with the contents of the
Handling Instructions to be able to offer appropriate guidance to the customer during sales promotion.
7-2. Caution Plate
The following basic safety precautions are listed on the Name Plate attached to the main body of each tool.
However, these precautions are not listed for European countries.
For Oceania