Initial installation
1
Confirm the picture on the TV screen with
OK
on the
remote control. ’Autoinstall’ starts. This message will
appear:
AUTO INSTALL
SEARCHING
00 TV CHANNELS FOUND
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
Wait until all the TV channels have been found. This can
take several minutes.
2
When all TV channels have been found, ’
STORED
’ will
briefly appear.
The initial installation is now complete.
Note:
Check the time and the date. Read the section ’setting
the clock and date’ in this chapter.
* If you have connected a satellite receiver, please read the
section ’Satellite receiver’.
* If you have connected a decoder, you must install it as
described in the next section.
Allocating a decoder
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your video recorder. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
On the video recorder, use
;
P+
or
P-
=
or number
buttons
0-9
on the remote control to select the
programme number you want to allocate the decoder to.
3
Press
MENU
on the remote control. The main menu will
appear.
4
Select the line ’
MANUAL SEARCH
’ with
;
P+
or
P-
=
and confirm with
OK
.
MANUAL SEARCH
PROGRAMME NUMBER
è P01
p
S-CHANNEL
NO
CHANNEL NUMBER
21
DECODER
OFF
________________________________
EXITpMENU
STOREpOK
5
Select the line ’
DECODER
’ with
P-
=
or
;
P+
.
6
Select function ’
ON
’ with
Q
or
P
.
Note:
When you select ’
OFF
’, the decoder will not be
allocated.
7
Confirm with
OK
.
8
To end, press
MENU
.
Your decoder has now been allocated to this TV channel.
Note:
When the function is switched on, ’
DEC
’ will appear in
the video recorder display for the TV channel you have
selected.
BBC1
2.
INSTALLING YOUR VIDEO RECORDER
5
