9
EN
TUNING
Tuning of broadcast channels not already preset in the VCR
can be performed in two ways.
AUTOMATIC TUNING
• By “AUTOMATICALLY” tuning channels and placing them
in sequential order in the VCR’s memory i.e. the first chan-
nel found will be memorized into the VCR’s channel posi-
tion 1, the second channel found will be memorized into
the VCR’s channel position 2 and so on.
• Execution of the “Automatic” tuning cancels all the preset
channels. DO NOT use this feature if you intend to use
some of the pre-tuned channels. Use the “Manual” tuning
function to tune in the additional channels you require.
MANUAL TUNING
• Each channel is tuned manually and individually. Follow
the steps laid out in the “MANUAL TUNING” section.
Before you preset Channel ...
• It is necessary to set the video channel if your VCR is
connected to the TV via the coaxial cable, and TV channel
35 is employed for broadcasting, or interference lines
appear on the picture. Please refer to “Video Channel
Setting”.
Automatic Tuning
You can programme the tuner to scan only the channels that
you can receive in your area.
• Use the remote control for this procedure.
Turn on the TV and select the TV channel to the video
channel on the TV.
Press
MENU
.
Press
PLAY/
o
o
or
STOP/
L
L
to select “INITIAL”, then press
F.FWD/
B
.
Press
PLAY/
o
o
or
STOP/
L
L
to select “CH TUNING”, then
press
F.FWD/
B
.
Press
PLAY/
o
o
or
STOP/
L
L
to select “AUTO”, then press
F.FWD/
B
.
• The tuner scans and memorizes all the active channels in
your area. After scanning, the tuner stops on the lowest
memorized channel.
5
4
3
2
1
MENU
TIMER
SET UP
INITIAL
INITIAL
CH TUNING
CLOCK
RF OUT
CH TUNING
AUTO
MANUAL
MOVE
scanning
To Select a Desired Channel
You can select a desired channel by using
CHANNEL (
o
o
/
p
p
)
, or directly pressing
NUMBER
on the
remote control.
• Enter a channel numbers as a two-digit number for the
quickest results. For example, to select channel 6, press
0
and
6
. If you only press
6
, channel 6 will be selected after
a brief delay.
• You can only select channels 1–99.
Manual Tuning
• Use the remote control for this procedure.
Press
MENU
.
Press
PLAY/
o
o
or
STOP/
L
L
to select “INITIAL”, then press
F.FWD/
B
.
Press
PLAY/
o
o
or
STOP/
L
L
to select “CH TUNING”, then
press
F.FWD/
B
.
Press
PLAY/
o
o
or
STOP/
L
L
to select “MANUAL”, then
press
F.FWD/
B
.
Press
PLAY/
o
o
or
STOP/
L
L
to select “POSITION”, then
press
F.FWD/
B
.
• When a weak signal is received in Manual Tuning mode, you
can change the background to solid blue or the static screen
by pressing
COUNTER RESET
.
Press
Number
,
PLAY/
o
o
, or
STOP/
L
L
to select your desired
position number, then press
F.FWD/
B
.
• You can select position number 01-99.
• If [ON] appears on the right side of “SKIP”, press
PLAY/
o
o
or
STOP/
L
L
to point to “SKIP”. Then, press
F.FWD/
B
to se-
lect [OFF].
• If you want to remove scrambled signals, press
PLAY/
o
o
or
STOP/
L
L
repeatedly to point to “DECODER”. Then,
press
F.FWD/
B
to select [ON].
Press
PLAY/
o
o
or
STOP/
L
L
to select “CHANNEL”, then
press
F.FWD/
B
.
Press
PLAY/
o
o
or
STOP/
L
L
. The VCR tuner will begin to
search up or down automatically. When a channel is
found, the VCR will skip searching and the picture will
appear on the TV Screen.
• You can select desired channel number by using
NUM-
BER
. You must refer to the channel plan and press three
digits to select the channel number. (To select channel
24, first press “0” button and then press “2” and “4”).
• If this is the channel you want, press
F.FWD/
B
.
7
6
5
4
3
2
1
Press
MENU
to exit.
NOTE:
To confirm that a channel has been
added, press
CHANNEL (
o
o
/
p
p
)
.
8
Channel Plan
CH Indication
TV Channel
01 – 10
IRA-IRJ, gap
21 – 69
E21 – E69
74 – 78
S01
~
S03, X, Y
80 – 100
S1 – S20, gap
121 – 141
S21 – S41
Содержание VTFX240EUK
Страница 1: ...USERS GUIDE VTFX240EUK ...