TIMER RECORDING
- 35 -
6 Set the start time
First, press CH
or
button repeatedly until your desired hour appears. (Example: 07)
Next, enter a minute. (Example: 30)
Then, press CH
or
button to point to AM or PM. (Example: PM)
7 Set the end time
First, press CH
or
button repeatedly until your desired hour appears. (Example: 08)
Next, enter a minute. (Example: 30)
Then, press CH
or
button to point to AM or PM. (Example: PM)
8 Set the channel number
Press CH
or
button repeatedly until your desired channel number appears. (Example: 16)
9 Set the tape speed
Press CH
or
button repeatedly until your desired tape speed appears. (Example: SP)
• "AUTO" is available only with Program No. 1.
See "Just-In Time Recording" on page 25 for the use of "AUTO" setting.
10 Exit the program mode
Press MENU button. Program 1 is now completed.
To set another program, repeat steps [1] to [10].
11 Set the timer
Press POWER button. This turns the VCR power off, and the "
" indicator lights up on the display. The number
of all programmed events are displayed with current time.