background image

IMPORTANT SAFEGUARDS 

 

9

near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a 
swimming pool, and the like. 

11  Accessories

 -- Do not place this video product on an unstable card, stand, tripod, 

bracket or table.  The video product may fall, causing serious injury to a child or adult, 
and serious damage to the appliance.  Use only with a cart, stand, tripod, bracket or 
table recommended by the manufacturer, or sold with the video product.  Any mounting 
of the product should follow the manufacturer's instructions, and should use a mounting 
accessory recommended by the manufacturer. 

11A

  An appliance and cart combination should be moved with care.  Quick stops, 

excessive force, and uneven surfaces may cause the appliance and cart combination to 
overturn. 

 

 

 

 

 

 

12  Outdoor Antenna Grounding

 -- If an outside antenna or cable system is 

connected to the video product, be sure the antenna or cable system is grounded so as 
to provide some protection against voltage surges and built-up static charges.  Section 
810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with 
respect to proper grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements for the grounding 
electrode.  See example below: 

EXAMPLE OF ANTENNA GROUNDING 

13  Power Lines

 -- An outside antenna system should not be located in the vicinity of 

overhead power lines or other electric light or power circuits, or where it can fall into 
such power lines or circuits.  When installing an outside antenna system, extreme care 
should be taken to keep from touching or approaching such power lines or circuits as 
contact with them might be fatal.  Installing an outdoor antenna can be hazardous and 
should be left to a professional antenna installer. 

USE 

14  Cleaning

 -- Unplug this video product from the wall outlet before cleaning.  Do not 

use liquid cleaners or aerosol cleaners.  Use a damp cloth for cleaning. 

15  Object and Liquid Entry

 -- Never push objects of any kind into this video product 

through openings as they may touch dangerous voltage points or short-out parts that 
could result in a fire or electric shock.  Never spill liquid of any kind on the video 
product. 

Содержание VT-F391A





























































Отзывы: