Getting Started
12
Getting Started
Relax. Using a VCR is very straightforward.
This sections explains how to hookup the VCR, quick tour of the controls, set up for
first-time operation using on-screen menus, and videocassette tapes.
Enjoy getting to know all about your Hitachi VCR. Let's get started.
Simple Hookups
1 Decide Where to Put Your VCR
Be sure your chosen location allows for proper ventilation, stability, and protection
from heat and moisture (see Important Safeguards).
Place the VCR near your TV but not on top of it. For convenience in using the remote
control, locate them no more than three feet apart.
If you have an external cable or antenna, place the TV and VCR where you have
ample cable to hook them up. If necessary, you can purchase a cable extension and
connector.
If you plan to route your VCR audio through your stereo speakers for better sound
reproduction, place the VCR near the stereo receiver, or have enough long audio cables
to make the connections. (but keep in mind that the electronic signal weakens the
further it has to travel.)
2 Decide Which Hookup Method to Use
To make your VCR function, you'll deal with two basic hookups:
1. The
audio and video signal:
If all you want to do is view a prerecorded videotape on
the VCR, this three-line hookup is the only one you need.
2. The
radio frequency (RF) signal
from a cable or antenna: Make this hookup if you
also want to record programs, or if you have no audio/video connectors on your TV.
We will show you the simplest hookups first and then present several variations to suit
specific needs. Be aware that you may need to purchase additional connectors to make
the desired hookup. These are available at video stores and electronic hardware
stores.
Choose which hookup method to use based on:
Your TV's capabilities
The type of antenna or cable system you have (for cable box hookup, see Advanced
Operations)
Any other devices you want to include in the system (stereo, second VCR, etc.)
