Hitachi VM-8400LA - Camcorder, Инструкция по эксплуатации

Страница: 29 / 63

DATE RECORDING
29
DATE RECORDING
When the date has been set, the camcorder will enter the automatic date recording mode
automatically. Specify the required date mode option before recording.
1. Press and hold the small button on "CAM/OFF/ VIDEO", and then slide it to "CAM" position.
2. Press "DATE/TIME" repeatedly to select the date display you want to record.
and date - Automatic date recording
This option records the date automatically once a day at the beginning of recording for 10
seconds.
NOTES:
•
The camcorder records the same date when;
-the cassette is replaced.
-you select
and date display again.
-the recording is less than 10 seconds long.
•
If the date changes while recording continues over 10 seconds, the new date is recorded for
about 10 seconds the next time you make a recording.
and date - Automatic title and date recording
This option records the date and created title (see "TITLE RECORDING" on page 35)
automatically once a day at the beginning of recording for 10 seconds.
Date only - Date recording
The camcorder records the date with the picture all the time.
No display - No date recording
The camcorder does not record the date.
Date and time - Date and time recording
The camcorder records the date and time with the picture all the time.
3. Press "REC/PAUSE.
Recording will start.
NOTES:
•
When and date display is selected, the date disappears about 10 seconds after
recording is started.
•
When and date display is selected, the title and date disappear about 10 seconds after
recording is started.