TITLE RECORDING
45
Creating a title
1.
Attach a power source to the camera/recorder and slide
"POWER"
switch to either
"CAM"
or
"VIDEO"
position.
2.
Press
"TITLE"
button. The flashing cursor will appear in the viewfinder.
3.
Press
"SHIFT"
button repeatedly to move the flashing cursor to the place you want to
begin your title.
4.
Select the first character for your title by pressing the
"-"
or
"+"
button repeatedly
until the desired character appears.
NOTE:
Each title can contain up to two lines of 16 characters each. A chart showing the
characters contained in the titler is located on page 27.
5.
After you have selected the first character, press
"SHIFT"
button to move the flashing
cursor to the place you want the next character.
6.
Repeat steps 4 and 5 until you have completed the title.
NOTE:
Character may flash, however it will be recorded correctly without flashing.
7.
After completing your title, press
"PAGE"
button and create the title on another page.
8.
After creating the title, press
"TITLE"
button to remove the title graphics from the
viewfinder. Now title graphics is stored in memory.
NOTE:
As long as the correct current time can be displayed, the title is held in memory.
Содержание VM-1700A - Camcorder
Страница 13: ...IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER CHARGER 13 as close to the point of cable entry as practical ...
Страница 15: ...ELECTRONIC VIEWFINDER 15 ...
Страница 29: ...IDENTIFICATION AND OPERATION OF CONTROLS 29 Graphics in the Electronic Viewfinder ...
Страница 34: ...AUTO FOCUS 34 6 Objects moving rapidly 7 Dark objects ...