Ch 2: System Environment Setting
Hitachi VisionBase 8880R Server
29
PCI Configuration
Select Resources
Specify the resource to be assigned to the PCI slot (interrupt level). In ordinary circumstances, use the default.
•
PCI IRQ line 1, PCI IRQ line 2, PCI IRQ line 3, PCI IRQ line 4
Auto:
Default
3
4
5
7
9
10
11
12
14
15
NOTE: If some resource settings are incorrect, an asterisk “*” is attached to the item, and a message is
displayed at the bottom of the screen. Recheck the setting.
The correspondence between PCI IRQ lines and PCI slots is as follows:
Line 1 corresponds to slots 7, 11, 15, and 19
Line 2 corresponds to slots 1, 4, 8, 12, and 16
Line 3 corresponds to slots 2, 5, 9, 13, and 17
Line 4 corresponds to slots 3, 6, 10, 14, and 18
Current Resources
The resource (interrupt level) currently assigned to the PCI slot is displayed.
I/O Device Configuration
Serial port 1, 2
Used to set built-in serial ports 1 and 2 (built-in COM ports 1 and 2). In ordinary circumstances, use the default
settings.
•
Serial ports 1 and 2
Disabled
Enabled (default)
•
Base I/O address/IRQ
3F8/IRQ 4: (default for serial port 1)
2F8/IRQ 3: (default for serial port 2)
3E8/IRQ 4
2E8/IRQ 3
3F8/IRQ 11
3E8/IRQ 10
2F8/IRQ 11
2E8/IRQ 10
NOTE: Make sure that the settings in Base I/O address/IRQ for serial port 1 do not overlap with those for serial port 2.
