●
Input/output (I/O) signal connection 4-6
Pin
No.
Name
Input/output
Remarks
NPN Interface
PNP Interface
NPN
PNP
1
Power supply for Print target detector
Output
●
DC24V, 100mA max. (*1)
●
Power supply, NPN / PNP can be selected
by SW1.
2
Print target detector
Input
3
Ground for Print target detector
-
4
Print stop
Input
●
NPN / PNP can be selected by SW2
5
Signal ground
-
6
Power supply for encoder
Output
●
DC24V, 100mA max. (*1)
●
Totem pole / Open collector (NPN) can
be selected by SW1
●
Power supply can be selected by SW1
7
Encoder signal (Totem pole)
Input
8
Encoder signal (Open collector NPN)
Input
9
Ground for Encoder
-
10
Ready
-
Output
-
●
Open collector (NPNn) only.
11
Signal ground
-
-
-
12
Fault
-
Output
-
13
Warning
-
Output
-
14
Deflection voltage ON/OFF signal
Input
●
NPN / PNP can be selected by SW2
15
Reciprocative print signal
Input
16
Run signal
Input
17
Reset signal
Input
18
Stop signal
Input
19
Print-in-progress / Print-complete
Output
●
Print-in-progress/ Print-complete can be
selected with screen operation.
●
NPN / PNP can be selected by SW2
20
Online output
Output
21
Universal output 1
Output
22
Universal output 2
Output
23
Signal ground
-
[ Connection to the external connection terminal block (TB1 of EZJ127 board) ]
(*1): The supplying power capacity for print target detector and encoder is up to 100mA in total.
●
The I/F signal with conveyor is connected.
●
NPN/PNP interface can be selected for the print target detector and a part of I/O signals.
●
Totem pole/Open collector(NPN) can be selected for the encoder signal.
