manualshive.com logo in svg

Hitachi Universal Storage Platform VM, Руководство по планированию установки, Страница: 12 / 62

Поделиться
Скачать
Hitachi Universal Storage Platform VM Скачать руководство пользователя страница 12

1–2

Planning for Installation

Hitachi Universal Storage Platform VM Installation Planning Guide

Responsibilities

The responsibilities for installation planning are shared by the customer and 

the Hitachi Data Systems account team. The required installation planning 

tasks must be scheduled and completed to ensure successful and efficient 

installation of the Universal Storage Platform VM.

Customer Responsibilities

You are responsible for:
• Performing the 

Installation Planning Tasks

 described below.

• Verifying that all installation requirements have been met by 

completing the Installation Planning Checklist in this document

• Providing the customer-supplied hardware that is required for storage 

system installation (for example, electrical connectors and receptacles, 

rack)

• Observing all applicable safety requirements at all times

•

Hitachi Data Systems Responsibilities

Your Hitachi Data Systems account team will assist you throughout the 

installation planning process.

The Hitachi Data Systems account team is responsible for:
• Assisting you as needed during the installation planning process for 

your specific site and operational configuration

• Coordinating Hitachi Data Systems resources to ensure a successful 

installation and configuration of the Universal Storage Platform VM

Installation Planning Tasks

You, the customer, are responsible for performing the following tasks, with 

assistance as needed from the Hitachi Data Systems account team, to 

prepare for installation of the Universal Storage Platform VM storage 

system:
1.

Read this document

 carefully to understand the installation 

requirements for the Universal Storage Platform VM. You will use the 

information in this document to determine the specific requirements for 

your installation.

2.

Review the 

Hitachi User and Reference Guide

 (MK-96RD635) to 

familiarize yourself with the components, features, and functions of the 

Universal Storage Platform VM storage system.

3.

Complete the 

Installation Planning Checklist on page 1-4

 in this 

document before equipment delivery to verify that all installation 

requirements are met.

NOTE:

The Universal Storage Platform VM must be installed by trained 

Hitachi Data Systems personnel or trained Authorized Service Providers. 

The Universal Storage Platform VM is not a customer-installable product.

Содержание Universal Storage Platform VM































































Отзывы:

Нет отзывов