Hitachi UltraVision UT47V702, Руководство по обслуживанию

Страница: 13 / 96

D8MW
12
BASIC SETUP AND OPERATION
For more information on connecting and using the monitor, refer to the owner’s guide.
.
Connect the power cord to the rear panel.
3
Connect to external equipment.
Example 1: Connecting to PC
To insert D-sub 15 pin, tilt the monitor forward and bring the terminals into view. Two people are required
to hold the monitor and insert D-sub 15 pin safely. Be careful not to damage the panel.
*D-sub 15 and Audio cables are not included.
Example 2: Connecting to DVD player
*
*
Audio Cable
D-Sub 15
Tilt Forward
HDMI Cable
Power Cord
HDMI Cable
Power On...
.
Connect the plug into the wall socket after all other
connections are completed.
CAUTION
Ensure that both ends of the power cord are easily
accessible.
The Main Power Switch is factory set to On
(activated), therefore after you connect the plug into
the wall socket, the color of the indicating lamp must
turn Green and the Illumination Lamp turns Blue.The
image will display on screen.
Once the Main Power switch is on, you can turn On/
Off by pressing the Power (On/Off) button on the
remote control.
If no equipment is connected to the Monitor the color
of the indicating lamp turns to Orange, and the
Illumination Lamp turns off indicating Power Save
Mode.
AC
Wall
Socket
Monitor
Rear
Panel
Main Power Switch
(on the underside)
Front
Rear
Illumination Lamp Indicating Lamp