background image

25

ENGLISH

SYMPTOMS

POSSIBLE SOLUTIONS

Digital 

broadcasting 

screen 

problem.

Check digital signal strength.

No CATV 

reception.

Check all Cable TV connections.

Set Air/Cable menu option to the Cable mode.

Station or Cable TV system problems, try 

another station.

Horizontal 

or diagonal 

bars on 

screen.

Check antenna connections, adjust or re-

direct antenna.

Check for sources of possible interference.

No reception 

above 

channel 13.

Make sure Signal Type option is in the 

appropriate mode.

If using antenna, check UHF antenna 

connections.

No Remote 

operation.

Batteries are weak, dead or inserted 

incorrectly.

Remote is out of range, move closer to TV 

(within 15 feet).

Make sure Remote is aimed at sensor.

Confirm there are no obstructions between 

the Remote and the TV.

Make sure the power cord is plugged in.

TV shuts off.

Sleep Timer is set.

Power interrupted.

Closed 

- Caption is 

not activated.

TV station experiencing problems or program 

tuned is not closed captioned. Try another 

channel.

Check Cable TV connection or VHF/UHF 

antenna, reposition or rotate antenna.

Set closed caption decoder in the menu.

TV is not 

shown in 

your

language.

Select proper language in the menu options.

Use the following checklist for troubleshooting if you have problems with your LED TV. Consult your local dealer or service outlet if 

problems persist. Be sure all connections are properly made when using with other units.

SYMPTOMS

POSSIBLE SOLUTIONS

TV does not 

operate.

Make sure the power cord is plugged in.

Try another AC outlet.

Power is off, check fuse or circuit breaker.

Unplug unit for an hour, then plug it back in.

Poor sound 

or no sound.

Station or Cable TV experiencing problems, 

tune to another station.

Check sound adjustments (Volume and 

Mute).

Check for sources of possible interference.

Poor picture 

or no picture.

Station or Cable TV experiencing problems, 

tune to another station.

Make sure channels are set into memory.

Check antenna or Cable TV connections, 

adjust antenna.

Check for sources of possible interference.

Check picture control adjustments.

Poor 

reception on 

some 

channels.

Station or Cable TV experiencing problems, 

tune to another station.

Make sure channels are set into memory.

Station is weak, adjust antenna to receive 

desired station.

Check for sources of possible interference.

Poor color or 

no color.

Station or Cable TV experiencing problems, 

tune to another station.

Make sure channels are set into memory.

Check picture control adjustments.

Check antenna or Cable TV connections, 

adjust antenna.

Check for sources of possible interference.

Picture 

wobbles or 

drifts.

Station or Cable TV experiencing problems, 

tune to another station.

Make sure channels are set into memory.

Cable TV company is scrambling signal.

Adjust antenna.

Troubleshooting

FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL: 

1-800-289-0981

WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READY

OR WRITE TO:

ORION SALES, INC.

3471 N. UNION DR.

OLNEY, ILLINOIS 62450

3AQ0221B_eng.indd   25

3AQ0221B_eng.indd   25

7/15/10   9:22:05 AM

7/15/10   9:22:05 AM

Содержание ULTRAVISION LE19S304




























Отзывы: