manualshive.com logo in svg

Hitachi Ultrastar 15K450, Технические характеристики

Хитачи Ultrastar 15K450 - это высокопроизводительный жесткий диск с быстрой скоростью вращения. Просмотрите спецификации и загрузите руководство пользователя бесплатно с нашего веб-сайта. manualshive.com - ваш источник полезной информации для пользователей.

Поделиться
Скачать
background image

                   

Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification

137   

19.6  LOG SELECT (4C)

Table 116: Log Select (4C)

The LOG SELECT command provides a means for the Initiator to clear statistical information maintained by the drive and 
reported via the LOG SENSE command.

•

 PCR 

The Parameter Code Reset determines whether the Log Sense parameters will be cleared and unit attention posted 

for all other Initiators. A value of 1 indicates that the parameters be cleared, while a value of zero (except when PC = 
11b) indicates that the parameters not be cleared. Parameter list length must be zero when PCR is 1.  The PC field is 
ignored for list parameters, i.e. when the Format and Linking (F&L) field contains 01b or 11b.

•

SP 

The Save Parameters bit value of zero indicates that the page parameters not be saved. A value of 1 indicates that the 

page parameters that are savable be saved after they have been changed. SP bit MUST be 1 if parameter list length is 
greater than zero. Otherwise it will result in a 

Check Condition 

status being returned. The sense key shall be set to 

Illegal Request

 and additional sense code of 

Invalid Field in CDB

. 

•

PC 

The Page Control field defines the type of parameters to be selected. The PC field set to 11b (and PCR is then a don't 
care) indicates that the Default Cumulative values are set to their default values of 0. If the PC field is set to 01b and 
PCR is set to 1, the Current Cumulative values are also set to their default values of 0.

Parameter List Length MUST be zero when PC = 11b. Otherwise the command is terminated and a 

Check Condition 

status is returned. The sense key shall be set to 

Illegal Request

 and additional sense code of 

Invalid Field in CDB

.

•

Parameter List Length 

The Parameter List Length field specifies the length in bytes of the parameter list that shall be 

located in the DATA OUT buffer. A parameter list length zero indicates that no pages shall be transferred.

Note:

 

A specified length greater than 0x00FF will result in a 

Check Condition 

status being returned. A length that results in 

log data being truncated will generate a 

Check Condition 

status.

Note:

 

For page 0Fh, the maximum parameter list length supported is 4004h (4 bytes for the header and 100h bytes for each 

of the 40h parameters that are supported). The Parameter List Length must be an integral of the number of parameters plus the 
4 byte header. (Ex: Parameter length =104h for one parameter, 204h for 2 parameters,... 4004h for all 40h parameters).

The drive allows updates to the current cumulative values only. A value of zero is acceptable and is not considered an error.
The drive updates only pages 0Eh, the Start/Stop Cycle page and 0Fh, the Application Client page. For other pages the param-
eters are ignored. If the data out buffer contains multiple pages then the application client should send the pages in ascending 
order. If the data out buffer contains multiple log parameters within a page,all log parameters within the page should be sent 

Byte

Bit

7

6

5

4

3

2

1

0

0

Command Code = 4Ch

1

Reserved = 0

Reserved = 0

PCR

SP

2

PC

Reserved = 0

3

4

5

6

Reserved = 0

7

8

(MSB)                                        Parameter List Length = 0

(LSB)

9

Reserved = 0

FLAG

LINK

Содержание Ultrastar 15K450


































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Ultrastar 15K450

XenData X1 Installation And User Manual preview
X1
Бренд: XenData Страницы: 12
iDiskk mini Instruction Manual preview
mini
Бренд: iDiskk Страницы: 11
LaCie LaCie Ethernet Big Disk Quick Install Manual preview
LaCie Ethernet Big Disk
Бренд: LaCie Страницы: 16
LaCie 4BIG QUADRA USB 3.0 User Manual preview
4BIG QUADRA USB 3.0
Бренд: LaCie Страницы: 41
LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Бренд: LaCie Страницы: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Бренд: LaCie Страницы: 14
LaCie Hard Drive Quick Install Manual preview
Hard Drive
Бренд: LaCie Страницы: 13
LaCie D2 BLU-RAY XL Manual preview
D2 BLU-RAY XL
Бренд: LaCie Страницы: 29
LaCie D2 BLU-RAY XL Brochure & Specs preview
D2 BLU-RAY XL
Бренд: LaCie Страницы: 4
LaCie 301160U - 1TB Ethernet Disk RAID Network Attached... Quick Install Manual preview
301160U - 1TB Ethernet Disk RAID Network Attached...
Бренд: LaCie Страницы: 5
LaCie 301382U Specifications preview
301382U
Бренд: LaCie Страницы: 6
RAID Falcon 24-Bay Installation And Hardware Reference Manual preview
Falcon 24-Bay
Бренд: RAID Страницы: 108
Wanroy WY51100 User Manual preview
WY51100
Бренд: Wanroy Страницы: 24
IBM DTTA-351010 - Deskstar 10.1 GB Hard Drive Specifications preview
DTTA-351010 - Deskstar 10.1 GB Hard Drive
Бренд: IBM Страницы: 188
TRINITY Pro TLSF-7209 Owner'S Manual preview
TLSF-7209
Бренд: TRINITY Pro Страницы: 12
Muscle Rack MRWB-3 Assembly Instructions preview
MRWB-3
Бренд: Muscle Rack Страницы: 2
Sans Digital MOBILESTOR MS4UT+(B) Install Manual preview
MOBILESTOR MS4UT+(B)
Бренд: Sans Digital Страницы: 2
Sans Digital TOWERRAID TR4M+ Quick Installation Manual preview
TOWERRAID TR4M+
Бренд: Sans Digital Страницы: 1

Бренды по названию

Популярные бренды

Загрузить еще бренды