Hitachi UC 24YJ, Технические данные и руководство по обслуживанию

Страница: 21 / 34

--- 19 ---
6. PRECAUTIONS IN SALES PROMOTION
6-1. Safety Instructions
In the interest of promoting the safest and most efficient use of the Model UC 24YJ Charger by all of our
customers, it is very important that at the time of sale the salesperson carefully ensures that the buyer seriously
recognizes the importance of the contents of the Handling Instructions.
6-1-1. Handling instructions
Salespersons must be thoroughly familiar with the contents of the Handling Instructions in order to give pertinent
advice to the customer.
(1) Connect the charger to an AC power outlet only.
Use of any other power source (DC outlet, fuel-powered generator, etc.) will cause the charger to overheat
and burn out.
(2) Do not use any voltage-increasing equipment (transformer, voltage regulator, etc.) between the power source
and the charger.
If the charger is used with voltage over and above that indicated on the unit, it will not function properly.
(3) Conduct battery charging in an ambient temperature range of 0 ˚C --- 40 ˚C.
If charging is attempted when the ambient temperature is below -5 ˚C, overcharging occurs because the
thermistor and thermostat do not function properly, thereby reducing the service life of the battery.
If charging is attempted when the ambient temperature is above 40 ˚C, it is possible to charge batteries with
an S terminal, the service life of the batteries may be considerably reduced.
(4) Do not use the charger for successive charging.
In very hot locations, if two or more batteries are charged successively the temperature of the charger will rise
excessively, and might cause the charger to fail. Instruct the customer to wait at least 5 minutes before
commencing next charging. Particular care is necessary in summer or tropical countries when the power
source voltage is high.
(5) Do not insert foreign objects into the air vent on the charger.
The charger case is equipped with air vents to protect the internal electronic components from overheating.
Caution the customer not to allow foreign materials, such as metallic or inflammable objects, to be dropped or
inserted into the air vents. This could cause electrical shock, fire or other serious hazards.
(6) Do not attempt to disassemble the charger.
Incorrect parts replacement and/or wiring will cause malfunctions which could result in fire or other hazards.
Instruct the customer to bring the charger to an authorized service center in the event repair or replacement is
necessary.