Hitachi SV12SG, Технические данные и руководство по обслуживанию

Страница: 10 / 17

--- 7 ---
Fig. 2
Tab Terminal (Blue) [6]
Viewed from the commutator
Internal Wire (Brown) [5]
Internal Wire (Blue) [24]
Tab Terminal (Brown) [23]
8-3. Tightening Torques
(1) Tapping Screw (W/Flange) D4 x 20 (Black) [2] ..................... 2.0 0.5 N
•
m (20 5 kgf
•
cm, 1.5 0.4 ft-lbs.)
(2) Tapping Screws (W/Flange) D4 x 16 [7] [33] ........................ 2.0 0.5 N
•
m (20 5 kgf
•
cm, 1.5 0.4 ft-lbs.)
(3) Tapping Screw (W/Flange) D4 x 10 (Black) [15] ................... 2.0 0.5 N
•
m (20 5 kgf
•
cm, 1.5 0.4 ft-lbs.)
(4) Machine Screw M4 x 10 [18] ................................................. 1.8 0.4 N
•
m (18 4 kgf
•
cm, 1.3 0.3 ft-lbs.)
(5) Seal Lock Flat Hd. Screw M4 x 12 [31] ................................. 1.8 0.4 N
•
m (18 4 kgf
•
cm, 1.3 0.3 ft-lbs.)
(2) Wiring the Stator [22]
When wiring the Stator [22] , be sure to insert each terminal in correct direction as shown in Fig. 2. At this
time, securely insert each terminal as far as it will go.