background image

– 5 –

ENGLISH

Press

Press

Temporary Switch

emporary Switch

Non-conductor Stick

Non-conductor Stick

INDOOR UNIT INDICATORS

   TEMPORARY SWITCH

Use this switch to start and stop when the remote
controller does not work. [Use non-conductor stick
(example toothpick)]

By pressing the temporary switch, the operation is
done in previously set operation mode.

When the operation is done using the temporary switch
after the power source is turned off and turn on again,
the operation is done in automatic mode.

OPERATION INDICATOR

TIMER LAMP

This lamp lights when the timer is working.

OPERATION LAMP

This lamp lights during operation.
The OPERATION LAMP flashes in the following cases
during heating.

(1) During preheating

For about 2–3 minutes after starting up.

(2) During defrosting

Defrosting will be performed about once an hour
when frost forms on the heat exchanger of the
outdoor unit, for 5–10 minutes each time.

FILTER LAMP

When the device is operated for a total of about 200
hours, the FILTER lamp lights to indicate that it is time
to clean the filter. The lamp goes out when the
“        (AUTO SWING)” button is pressed while the
device is on “STANDBY MODE”.

Содержание Summit RAC-80YH5



























Отзывы: