Hitachi SF-130TCV, Инструкция по эксплуатации, Страница: 28 / 32

28
How to Install the Washing Machine
Installing the drain hose
1 Lay the washing machine down on its back.
2 Pull the drain hose out of the washing machine.
3 Insert the narrow part of the drain hose into the clamp on the washing machine.
4 Stand the washing machine up.
5 Insert the end of the drain hose into the drain channel.
n
Do not allow the drain hose to be bent, twisted, pulled out and damaged, stepped on, or crimped.
n
Spread a cloth on the ground before laying the washing machine down on its back to prevent damaging
it.
n
Use a knife to cut the end of the drain hose at a 45 degree angle because if the drain channel is shallow
and the end of the drain hose is blocked, it could cause a malfunction.
n
Keep the top of the drain hose no more than 10 cm above the fl oor if it crosses a door sill or something
else. If it is higher than this, the water has diffi culty draining and a "C2" error (water does not drain) may
occur.
n
Do not extend the drain hose more than 2 meters from the washing machine.
2 m or less
10 cm or less