Operation Instructions
Operation Instructions
- 5 -
MEMORY
∗
Function – To choose the available functions in the remote control.
MENU / BACK
•
Press this button can choose detail functions.
∗
Function – To save settings in the remote control.
•
Choose
「
MEMORY
」
function and there are 2 memory set that can be saved.
(Memory setting need to enter from main function display)
∗
Function – To set the desired room temperature.
ROOM TEMP.
TIMER
FAN SPEED
•
Temperature
varies
from
16°C ~ 32°C.
•
Standard
▲
3°C ~
▼
3°C
•
Auto-control
mode
•
The temperature is increased by 1
°
C by pressing
▲
button
(Max. 32
°
C).
•
The temperature is decreased by 1
°
C by pressing
▼
button
(Min. 16
°
C).
∗
Function – To start or stop operation after a set time.
•
Timer
「
ON , OFF
」
mode. To set the timer the unit must be
power OFF.
•
TO SET ON: Press
►
for timer ON operation and the
display will appear 1 Hr as starting time. Then adjust the
time by pressing
▲▼
(1~24 Hr). Each press is increased
or decreased by 1Hr. And the unit will automatically
shutdown after the set time.
•
TO SET OFF: Press the sleep button and the controller
will automatically set the timer OFF then the unit will
turn ON.
∗
Function – To set the desired mode operation of the unit.
MODE
•
By pressing the MODE button you can
choose COOL,
DRY, FAN operation.
•
Three speed can be chose and easily understand the status
by text and figure.
∗
Function – To set the desired fan speed of the unit.
•
Four speed can be chose and easily understand the status
by text and figure.
•
During Cool / Fan mode you can adjust the fan speed to
Qlow, Low, Med, High.
•
During Dry mode you can adjust the fan speed to
Qlow and Low only.
