Hitachi RPI-0.8FSNQL(H), Руководство по эксплуатации, установке и обслуживанию, Страница: 21 / 22

2.0
5
6
15
Capacity
Capacity
0.8 1.0 1.3 1.5 1.8 2.3
2.5 3.0 3.3 4.0 5.0 6.0
Setting
Position
Set by inserting
Slotted screwdriver
into the groove
Ex.) Set at No.16 Unit
DSW6
Set No.1 Pin ON
RSW1
Set at "6"
Before shipment. DSW6 and RSW1 are set to "0".
Max.64 units are available to set when all the equipment
to be connected are corresponding to H-LINK.
Max.16 units when the units corresponding/
non-corresponding to H-LINK are combined.
Setting
Position
Set by inserting
Slotted screwdriver
into the groove
Ex.) Set at No.5 Cycle
DSW5
Set All Pins OFF
RSW2
Set at "5"
Before shipment. DSW5 and RSW2 are set to "0".
Max.64 cycles are available to set when all the equipment
to be connected are corresponding to Hi-NET.
Max.16 cycles when the units corresponding/
non-corresponding to Hi-NET are combined.