Hitachi RP 350YDH, Инструкция по эксплуатации, Страница: 28 / 240

28 - en
(* depending on the equipment variant)
▷
Place the upper section on the container and close the side
latches.
6.4 Insert PE emptying and disposal bag*
NOTE
Only the vacuum cleaners class
M
and
H
with special containers
and rotary slider in the suction aperture of types RP350YDM and
RP350YDH are suitable for the use of PE Emptying and disposal
bags.
NOTE
Operating the rotary slider*
▶
Push the rotary slider* from the inside to the outside, turn
through 180° (see mark) and then push inwards again from
the outside through the suction spigot
▶
Place the rotary slider* in the suction aperture with the mark ●
pointing upwards.
▷
Slide the fl ange completely over the suction aperture and place
the upper bag opening over the edge of the container.
▷
Place the upper section on the container and close the side
latches.
(* depending on the equipment variant)
7 Changing the fi lter
7.1 Changing the folding fi lter
(See short-form instructions )
▷
Shake the folding fi lter cassettes before changing them.
▷
Turn the lock on the latch through 90° in a counter-clockwise
direction with a coin or similar object and push the latch to the
rear.
▷
Fold the hood up
▷
Immediately isolate the folding fi lter cassettes that you have
removed in a dust-tight plastic bag and dispose of properly in
accordance with the stipulations.
▷
Insert new folding fi lter cassettes.
▷
Lift the locking bracket up, fold the hood down and click in place
with light pressure.
8 Changing the motor protection fi lter
(See short-form instructions )
NOTE
If the motor protection fi lter is contaminated this indicates defec-
tive fi lter cassettes.
▷
Replacing the folding fi lter cassettes.
▷
Replace the motor protection fi lter or wash the motor
protection fi lter under fl owing water, dry and re-insert..
9 Transport
▷
Insert the closing plug* of the vacuum cleaner into the suction
aperture.
▷
The motor head must be securely fi xed to the container (close
the latches).
▷
Place the accessories in a suitable plastic bag and seal the plas-
tic bag or place it in the tool storage compartment.
▷
Plug the ends of the suction hose into each other.
▷
Place the hose around the vacuum cleaner and clamp onto the
handle
(see short-form instructions).
10 Maintenance
NOTE
Switch the vacuum cleaner off and pull out the mains plug before
any maintenance work.
For maintenance by the user, the vacuum cleaner must be
-
dismantled,
-
cleaned and
-
maintained,
as far as possible without creating any danger to the maintenance
personnel or other.
Precautionary measures
Suitable precautionary measures include
-
Cleaning before dismantling,
-
Provide local fi ltered positive ventilation where the vacuum
cleaner is to be dismantled,
-
Clean the maintenance area and
-
suitable personal protection equipment.
000Book̲RP350YDM.indb 28 000Book̲RP350YDM.indb 28 2015/03/06 15:11:50 2015/03/06 15:11:50