6
●
「
Humidity Setting
」
Dehumidifying Function
How to Operate
●
EASY ONE TOUCH
Dehumidifier Function Selection
：
With only one touch, the unit activates.
Easy to turn on/off and select an individual function. All needs can be satisfied with only one touch.
●
Humidity Indicator
Current Humidity
is 60%
Current Humidity
is lower than 30%
Current Humidity
is higher than 90%
Set the humidity
control to 60%
Press the pad Dehumidifying Function
The machine will keep running until the water
receptacle is full no matter how much the
humidity level is.
Press the pad Dehumidifying Function.
With the temperature detection, the unit will
control the relative humidity by itself to reach to
the most comfortable humidity level. Humidity
control setting is not allowed at this mode.
(this unit has no humidifying function)
Press the pad Dehumidifying Function.
The unit will automatically operate to reach
humidity level which mold is not easy to grow.
Humidity control setting is not available.
This function cannot remove the mold
that has been grown.
Note
Press the pad Dehumidifying Function.
The machine will detect the humidity around the unit
by the sensor, the operation will automatically stop if
the humidity is below 30%. Clothes drying function,
the time required to dry clothes will vary by number,
thickness and wetness of clothes. Wind speed and
humidity level control is not available. If the humidity
of the room is below 30%, the operation may stop
before the laundry dries. The “Automatic Clothes
Drying” is an assistant function for clothes drying. If
the clothes have not yet been dried, in such case,
press the “Continuous Dehumidification”.
Press the pad to select the desired humidity
level and the unit will operate. (the setting sequence
is
：
40% → 45% → 50% → 55% → 60% → 65% →
70% → 40% → 45% →…… )
