manualshive.com logo in svg

Hitachi RAC-S18H2AA, Руководство пользователя

Поделиться
Скачать
Hitachi RAC-S18H2AA Скачать руководство пользователя страница 18

– 16 –

ATTACHING THE AIR CLEANSING FILTERS

1

Open the front panel.

●

 Pull up the front panel by holding it at both sides 

with both hands.

2

Remove the  lter.

●

 Push upward to release the claws and pull out the 

 lter.

3

Attaching the air cleansing  lters to the  lter. 

●

  Attach the air cleansing  lters to the frame by gently 

compress its both sides and release after insertion 
into  lter  frame.

4

Attach the  lters.

●

  Attach the  lters by ensuring that the surface written 

“FRONT” is facing front.

●

 After attaching the  lters, push the front panel at 

three arrow portion as shown in  gure and close it.

Cleaning and maintenance must be carried out only by quali ed service personal. Before cleaning, 
stop operation and switch off the power supply.

CAUTION

CAUTION

Do not bend the air cleansing
 lter as it may cause damage to
the structure.

NOTE

●

 In case of removing the air cleansing  lters, please follow the above procedures.

●

  The cooling capacity is slightly weakened and the cooling speed becomes slower when the air cleansing 

 lters are used. So, set the fan speed to "HIGH" when using it in this condition.

●

 Do not operate the air conditioner without  lter. Dust may enter the air conditioner and fault may 

occur.

!

!

Claws

(4 places)

(EN3) RAS-S18H2AA (1642).indd   16

5/20/10   10:55 AM

Содержание RAC-S18H2AA
























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды