Hitachi RAC-E10CAK, Инструкция по эксплуатации

Страница: 8 / 40

- - - -
COOLING OPERATION
Use the device for cooling when the outdoor temperature is -10- C.
°
If humidity is very high (over 0°C) indoors, some dew may form on the air outlet grille of the indoor unit.
1
3
2
STOP
Press the cooling button so that the display indicates
(COOL).
Set the desired FAN SPEED with the (FAN SPEED) button
(the display indicates the setting).
(AUTO) : The FAN SPEED is HI at fi rst and varies to MED or
LOW automatically when the preset temperature
has been reached.
(HI) : Economical as the room will become cool quickly.
(MED) : Fan speed slow.
(LOW) : Fan speed slower.
Set the desired room temperature with the TEMPERATURE
button (the display indicates the setting).
˚
C
The range of -°C is recommended as the
room temperature for cooling.
If the temperature setting is °C, the room
temperature will be controlled at around °C.
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
Press the (COOLING) button. Cooling operation starts with a
beep. Press the (STOP) button to stop operation. The cooling
function does not start if the temperature setting is higher than
the current room temperature (even though the (OPERATION)
lamp lights). The cooling function will start as soon as you set the
temperature below the current room temperature.
As the settings are stored in memory in the remote controller, you only
have to press the (COOLING) button next time.
■