Hitachi RAC-40CNH2 Скачать руководство пользователя страница 16

– 16 –

ADJUSTING THE AIR DEFLECTORS

1

Adjustment of the conditioned air in the upward and
downward directions.

The horizontal air deflector is automatically set to the
proper angle suitable for each operation. The deflector
can be swung up and down continuously and also set to
the desired angle using the “       (AUTO SWING)”
button.

If the “              (AUTO SWING)” button is pressed
once, the horizontal air deflector swings up and
down. If the button is pressed again, the deflector
stops in its current position. Several seconds (about
6 seconds) may be required before the deflector
starts to move.

Use the horizontal air deflector within the adjusting
range shown in the right figure.

When the “          (AUTO SWING)” button is
pressed while the operation is stopped, the horizontal
air deflector moves and stops at the position where
the air outlet closes.

When the auto swing operation is performed, if the
horizontal air deflector is moved manually, the
swinging range may drift. However, it will return to
the original operation range after a short time.

2

Adjustment of the conditioned air to the left and right.

Hold the vertical air deflector as shown in the figure and
adjust the conditioned air to the left and right.

        CAUTION

When operating the unit in cooling operation with the air deflector facing down and moving
automatically for a long period of time, water will condensed on the air deflector and drips
down occasionally. This will wet your furniture.

!

about 57

°

When cooling,
dehumidifying

about 15

°

about 
40

°

about 30

°

When heating

RESET

(EN2) RAS/RAC-40/50CHN2

3/25/05, 2:38

16

Содержание RAC-40CNH2























Отзывы: