– 7 –
ENGLISH
AUTOMATIC OPERATION
■
The device will automatically determine the mode of operation, HEAT, COOL or DEHUMIDIFY,
depending on the initial room temperature. The selected mode of operation will not change when
the room temperature varies.
1
Press the (START/STOP) button
●
Operation start with a “beep” sound.
Press the (START/STOP) button
●
Make sure the (Automatic) mode have been selected by using
the (FUNCTION) button.
●
The fan speed selector does not work at this operation.
STOP
Press the (ROOM TEMPERATURE) button
●
Temperature setting change by 1°C for each 1 time press.
Up
Down
●
You can raise or lower the temperature setting by a maximum of
3°C.
●
The display does not indicate the preset temperature in the Automatic
mode. Device will receive the setting by a “beep”.
■
You can slightly adjust the room temperature.
1
°
C
°
C
▲
▲
■
CONDITION OF AUTOMATIC OPERATION
●
The selected mode of operation will not change during the operation even though the room
temperature change.
Over 27°C
COOL
23 ~ 27°C
FUNCTION
27°C
Slightly lower than the
room temperature
LOW
FAN SPEED
HIGH at start, LOW after
the preset temperature is
reached
-
DRY
-
INITIAL ROOM
TEMPERATURE (APPROX.)
TEMPERATURE
SETTING
Under 23°C
HEAT
23°C
HIGH at start, MED or
LOW after the preset
temperature is reached
-
HITACHI
°
C
HITACHI
°
C
32CNH2 EN1
3/25/05, 2:30
7
