manualshive.com logo in svg

Hitachi RAC-18SX8, Инструкция по эксплуатации

Поделиться
Скачать
Hitachi RAC-18SX8 Скачать руководство пользователя страница 34

– 34 –

RAR-3R5

RAR-3R5

           Manual filter cleaning operation

• 

Use the remote controller to run filter cleaning operation when the air conditioner operation is stop.

• 

If the air conditioner is not in use for a long period, it is recommended to manually run filter cleaning 
before it is initialized.

Press the 

 (START/STOP) button twice.

• 

Press 

 (START/STOP) button on the remote controller twice to stop 

the process of filter cleaning operation.

STOP

Press the 

 (MANUAL CLEAN) button when the air-conditioner stops.

• 

The cleaning unit makes one cycle of back and forth movement to sweep 
the dust on the micro mesh stainless filter and the dust catcher puts the 
collected dust into the dust box.

• 

One cycle of filter cleaning operation will take approximately 7 minutes.

• 

During manual filter cleaning operation, movable panel and horizontal air 
deflectors remain closed when fan operation starts.

           Maintenance

• 

No daily maintenance is required. However, dust amount varies depending on the environment in which 
the air conditioner is used. Check the dust amount approximately once every two years and throw the 
dust, if any. 

(Maintenance, page 36)

• 

Greasy dirt can also be cleaned by the combined function of filter cleaning and micro mesh stainless filter. If the 
dirt looks heavy, remove the micro mesh stainless filter, dust catcher and filter cleaning wiper to wash them with 
water. (Maintenance, page 36~42)

Press the 

 (MANUAL CLEAN) button while pressing the 

 (ON/OFF) button 

(remain for 5 seconds).

• 

A double short beep sounds and the filter cleaning is not performed (filter cleaning 
operation is prohibited) is set.

• 

If the 

 (MANUAL CLEAN) button is pressed while pressing down the 

 

(ON/OFF) button again (hold the buttons for 5 seconds), a single short beep 
sounds and the setting returns to the filter cleaning operation.

• 

If the filter cleaning operation is 
prohibited, the operation check (page 
10), 

1

 automatic filter cleaning 

operation and 

2

 manual filter cleaning 

operation are not performed.

Filter cleaning operation (Normal)

(at time of purchase)

“Beep” sound

Filter cleaning operation 

is prohibited

“Beep Beep” sound

FILTER CLEANING OPERATION (continued)

2

3

HOW TO PROHIBIT THE FILTER CLEANING OPERATION

• 

With the remote controller, you can make a setting in which no filter cleaning operation is 
performed.

• 

This setting should be made only when the air conditioner is stopped.

Содержание RAC-18SX8





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды